Early screening is an important means to reduce breast cancer mortality. In order to solve the problem of low breast cancer screening rates caused by limited medical resources in remote and impoverished areas, this paper designs a breast cancer screening system aided with portable ultrasound Clarius. The system automatically segments the tumor area of the B-ultrasound image on the mobile terminal and uses the ultrasound radio frequency data on the cloud server to automatically classify the benign and malignant tumors. Experimental results in this study show that the accuracy of breast tumor segmentation reaches 98%, and the accuracy of benign and malignant classification reaches 82%, and the system is accurate and reliable. The system is easy to set up and operate, which is convenient for patients in remote and poor areas to carry out early breast cancer screening. It is beneficial to objectively diagnose disease, and it is the first time for the domestic breast cancer auxiliary screening system on the mobile terminal.
The development of muscle strength evaluating system based on Android system was developed in this research. The system consists of a lower unit and an intelligent mobile terminal. The pressure sensor of the lower unit was used to collect muscle strength parameters. And the parameters were sent to the Android device through the wireless Bluetooth serial port. Then the Android device would send the parameters to the doctor monitored platform through the Internet. The system realized analyzing the muscle strength parameters and real-time displaying them. After it ran on the Android mobile phones, it showed an effective result which proved that the system combined with mobile platform could make more convenient for the patients to assess their own muscle strength. It also provided reliable data references for doctors to know the patients' rehabilitation condition and to make the next rehabilitation plan.
There are already many ion detection methods available, and their development in long-term application practice has become very mature, which can achieve high-precision monitoring of different ion types and ion concentrations. However, in order to meet the requirements of modern smart healthcare, portable ion continuous monitoring methods with good portability, low operational difficulty, and high detection efficiency urgently need to be developed. However, existing detection methods are far from meeting the requirements of real-time and long-term health monitoring due to factors such as detection principles. In recent years, breakthroughs have been made in miniaturized and portable ion continuous monitoring technology, among which high-sensitivity and high-specificity miniature ion sensing components and miniaturized low-power driving measurement circuits have become the main research contents of this technology. This article starts with high-performance ion sensors in the front-end and high-level integrated driving measurement circuits in the back-end, summarizes the current development of miniaturized and portable ion continuous monitoring technology, reviews its applications, and looks forward to the possible development directions of portable ion monitoring technology in the future.
Portable electrocardiogram monitor is an important equipment in the clinical diagnosis of cardiovascular diseases due to its portable, real-time features. It has a broad application and development prospects in China. In the present review, previous researches on the portable electrocardiogram monitors have been arranged, analyzed and summarized. According to the characteristics of the electrocardiogram (ECG), this paper discusses the ergonomic design of the portable electrocardiogram monitor, including hardware and software. The circuit components and software modules were parsed from the ECG features and system functions. Finally, the development trend and reference are provided for the portable electrocardiogram monitors and for the subsequent research and product design.
Objective To discuss the application value in increasing the frequency of monitoring and ensuring the safety of anticoagulation therapy in patient self-monitoring (PST) and self-management (PSM) of portable coagulometer. Method This non-randomized prospective controlled study was conducted in 100 patients receiving oral warfarin anticoagulation therapy after heart valve replacement and met the inclusion criteria in our hospital between March 2013 and April 2014 year. All the patients were divided into three groups including an outpatient follow-up group(outpatient group), a self-monitoring group and a self-management group. Meanwhile, the patients in the outpatient group visited professional institutions, performed international normalized ratio (INR) testing with central lab and adjusted the dosage of orally administered warfarin by the doctors. And the other two groups performed INR testing with CoaguChek XS portable coagulometer by themselves, and the patients in the self-management group performed management by themselves. The follow-up time was 6 months. The dates of time in therapeutic range (TTR), fraction of time in therapeutic range (FTTR) and anticoagulation complications in the three groups were analyzed and compared. Results There was no significant difference in the INR results obtained from the follow-up time among the three groups (P=0.845) . TTR value of INR of the outpatient group, the self-monitoring group, and the self-management group was 45.9% (4368.0 days/9517.0 days), 61.2% (6057.0 days/9897.0 days), and 65.4% (2833.8 days/4333.0 days), respectively with a statistical difference among the three groups (P<0.001) . FTTR value of INR obtained from the outpatient group, the self-monitoring group, and the self-management group was 48.3% (99 times/205 times), 60.7% (164 times/270 times), and 64.9% (100 times/154 times) respectively. There was a statistical difference in the FTTR between the outpatient group and the self-monitoring group (P=0.007) , and also between the outpatient group and the self-monitoring group (P=0.002) . But there was no statistical difference between the self-monitoring group and the self-management group (P=0.392) . There were not any major bleeding and thrombosis complications in all study. And there was no statistical difference in the total complications, thrombosis, and bleeding complications rates between the outpatient group and the self-monitoring group, and also between the outpatient group and the self-management group (P>0.05) . Conclusions The patients receiving oral anticoagulation after heart valve replacement or their care providers were able to perform PST and PSM. The use of portable coagulometer for self-monitoring and self-management can increase the frequency of anticoagulation monitoring and achieve better INR target value control. PST and PSM could achieve higher quality of anticoagulation management and life and without increasing the risk of oral anticoagulation than the traditional monitoring method. The monitoring frequency of once a month is reasonable for the patients receiving oral anticoagulation more than half a year after heart valve replacement.
Objective To investigate the physiological effects of different oxygen injection site on ventilatory status and oxygenation during noninvasive positive pressure ventilation ( NPPV) with portable noninvasive ventilators. Methods A prospective crossover randomized study was performed. Oxygen injection site was randomized into the outlet of the ventilator, the connection site between mask and circuit, and the mask under the condition of leak port immobilized in the mask. Oxygen flow was retained in the baseline level at the initial 5 to 10 minutes, and adjusted to obtain arterial oxygen saturation measured by pulse oximetry ( SpO2 ) ranging from 90% to 95% after SpO2 remains stable. SpO2 at the initial 5 to 10 minutes, oxygen flow, ventilatory status, oxygenation, hemodynamics and dyspnea indexes at0. 5 hour, 1 hour, and 2 hours of NPPV were compared between different oxygen injection sites. Results 10 patients were recruited into the study. Under the condition of the same oxygen flow, SpO2 with oxygen injection site in the outlet of the ventilator was significantly higher than that with oxygen injection site in the connection site between mask and circuit [ ( 98.9 ±0.9) % vs. ( 96.9 ±1.1) % , P =0. 003] , whereas SpO2 with oxygen injection site in the connection site between mask and circuit was significantly higher than that with oxygen injection site in the mask [ ( 96.9 ±1.1) % vs. ( 94.1 ±1.6) %, P = 0.000] . Oxygen flow with oxygen injection site in the mask was statistically higher than that with oxygen injection site at other sites ( P lt; 0.05) . Arterial oxygen tension/ oxygen flow with oxygen injection site in the outlet of the ventilator was significantly higher than that with oxygen injection site in the connection site between mask and circuit ( 67.9 ±31.1 vs. 37.0 ±15.0, P =0.007) , and than that with oxygen injection site in the mask ( 67.9 ± 31.1 vs. 25.0 ±9.1, P = 0.000) . pH, arterial carbon dioxide tension, hemodynamics and dyspnea indexes were not significantly different between different oxygen injection sites ( P gt; 0.05) .Conclusions When portable noninvasive ventilator was applied during NPPV, oxygen injection site significantly affects improvement of oxygenation, and shows a trend for affecting ventilatory status and work of breathing. When the leak port was immobilized in the mask, the nearer oxygen injection site approaches the outlet of the ventilator, the more easily oxygenation is improved and the lower oxygen flow is demanded.
Magnetoelastic (ME) sensors, characterized by wireless, passive, low cost and high sensitivity, have widespread applications in various fields. However, its defects of large volume, high power consumption, poor portability and inconveniency for use limit the application prospects of the ME sensors. To solve this problem, the present paper shows a portable, low-power, resonance-type ME sensor detecting system based on STM32. The experimental results indicated that this detecting system allowed the ME sensor to complete the measurement of resonant frequency in different medium and different concentration, with a frequency resolution of less than 1 Hz, and the resonant frequency ratio of ME sensors in different sizes 0.933 8, closing the theoretical value of 0.942 3. Moreover, compared with the traditional impedance analyzer combined detecting system and the existing integrated detecting system, the present system has a power consumption of 0.68 W in operation and of only 2.20 mW in the dormancy mode. Therefore, the system can not only replace the original impedance analyzer combined detecting system, but also significantly improve the power control of the existing integrated detecting system, exhibiting the advantages of higher integration, portable measurement, and fine suitability for long-term monitoring.