Objective To review the research advances in animal models of human disc degeneration. Methods The relative articles in recent years were extensively reviewed. Studies both at home and abroad were analyzed and classified. The advantages and disadvantages of each method were compared. Results Studies were classified as either experimentally induced models or spontaneous models. The induced models were subdivided as mechanical (alteration of forces on the normal disc), structural (injury or chemical alteration) and genetically induced models. Spontaneous models included those animals that naturally developed degenerative disc disease. Conclusion Animal model of intervertebral disc degeneration is an important path for revealing the pathogenesis of human disc degeneration, and play an important role in testing novel interventions. With recent advances in the relevance of animal models and humans, it has a great prospect in study of human disc degeneration.
Under the background of high-quality development of public hospitals and from the perspective of medical technology management, this paper discusses the high-quality development path of medical technology management in West China Hospital, Sichuan University. By sorting out the development context of restricted medical technology management in this medical institution, it concludes that there are four problems in restricted medical technology management at present: lack of standardized management system, non-unified surgery grading management, technology management information level to be improved, and the after-effect evaluation and transformation mechanism of medical technology being not perfect. It is proposed that establishing standardized management system, unifying surgical grading catalogue, constructing intelligent information system and establishing achievement transformation mechanism are important ways to strengthen medical technology management.
ObjectiveTo investigate the regulation of human bone marrow mesenchymal stem cells (hBMSCs) osteogenic and adipogenic differentiations mediated by Wnt10b adenoviral vector in vitro. MethodsThe hBMSCs from ilial bone tissue in adults at passage 4 were infected by Wnt10b gene expression adenoviral vector (group A), Wnt10b-shRNA adenoviral vector (group B), and empty vector (group C), and non-transfected hBMSCs served as the blank control group. Then the cells were cultured separately in the circumstance of osteogenic induction, adipogenic induction, and non-induction. The alkaline phosphatase (ALP) staining, alizarin red staining, and oil red O staining were used to detect the osteogenic and adipogenic differentiations; real-time fluorescent quantitative PCR and Western blot were used to analyze the expressions of osteoblast and adipocyte genes and proteins. ResultsThe results of ALP staining were positive after osteogenic induction, group A showed strong staining, and group B showed the weakest staining. The results of alizarin red staining showed that there were a lot of patchy confluent brown mineralized nodules in group A; a few punctate brown mineralized nodules were seen in group B; and many punctuate brown mineralized nodules were found in groups C and D. The results of oil red O staining showed strong staining in groups B, C, and D after adipogenic induction, especially in group B; scattered or small clustered staining was observed in group A. The expressions of osteoblast genes and proteins were significantly higher in group A than groups B, C, and D, and in groups C and D than group B by real-time fluorescent quantitative PCR and Western blot test; however, the expressions of adipocyte genes and proteins showed a contrary tendency. ConclusionThe high level expression of Wnt10b can enhance osteogenic differentiation of hBMSCs, and the low level expression of Wnt10b can increase adipogenic differentiation of hBMSCs.
目的 通过对保留不同平面骶骨的新鲜人骨盆模型进行生物力学测试，分析骶骨切除平面与骨盆稳定性的关系，明确骶骨切除保留至何种程度时需行腰骶髂稳定性重建。 方法 选用6具正常成年男性新鲜尸体腰5-骨盆标本，采用200 N增量分级加载，以1.4 mm/min速率平稳加载直至1 000 N，依次测试保留完整骶骨及不同平面骶骨切除骨盆模型的最大主应力、剪切应力、位移及刚度变化，比较各组间的差异。最后测量1/2S1组骨盆环的极限载荷，记录骨折发生部位和骨折类型。 结果 随骶骨切除平面增高，最大主应力、剪切力及骶骨下沉位移在各测试点均有不同程度增大，骨盆的轴向刚度不断减小。当切除平面达骶1时，变化明显，尤其以经过骶1下1/4～下1/2时变化显著，与完整骶骨组比较，差异有统计学意义（P＜0.05）。骶1椎体下1/2平面切除后，骨盆的极限载荷是（2 375.97 ± 162.41）N，骨盆的破坏形态为经骶髂关节或骶椎的骨折。 结论 骶骨切除范围与骨盆环的稳定性密切相关，随着骶骨切除平面升高，残留骶髂关节各种应力急剧增高，骨盆的稳定性明显下降。当骶骨切除涉及骶1椎体时，极易发生骨折，需要进行腰骶髂局部重建以增强骶髂关节的稳定性。
Objective To explore the role and effectiveness of three-dimensional (3D) printing technology based on 3D multimodality imaging in surgical treatment of malignant bone tumors of limbs. Methods The clinical data of 15 patients with malignant bone tumors of the limbs who met the selection criteria between January 2016 and January 2019 were retrospectively analyzed. There were 6 males and 9 females, with a median age of 34 years (range, 17-73 years). There were 5 cases of osteosarcoma, 3 cases of chondrosarcoma, 2 cases of Ewing sarcoma, 1 case of hemangiosarcoma, 1 case of ameloblastoma, and 3 cases of metastatic carcinoma. The tumors were located in the humerus in 5 cases, ulna in 2 cases, femur in 3 cases, and tibia in 5 cases. The disease duration was 2-8 months (median, 4 months). Preoperative 3D multimodality imaging was administered first, based on which computer-assisted preoperative planning was performed, 3D printed personalized special instruments and prostheses were designed, and in vitro simulation of surgery was conducted, successively. Two cases underwent knee arthroplasty, 2 had semi-shoulder arthroplasty, 2 had proximal ulna arthroplasty, and 9 had joint-preserving surgery. Surgical margins, operation time, intraoperative blood loss, surgical complications, Musculoskeletal Tumor Society (MSTS) score, and oncological outcome were collected and analyzed. Results All 15 patients completed the operation according to the preoperative plan, and the surgical margins were all obtained wide resection margins. The operation time was 80-240 minutes, with a median of 150 minutes. The intraoperative blood loss was 100-400 mL, with a median of 200 mL. There was no significant limitation of limb function due to important blood vessels or nerves injury during operation. One case of superficial infection of the incision was cured after dressing change, and the incisions of the other patients healed by first intention. All patients were followed up 6-48 months, with a median of 24 months. Two of the patients died of lung metastasis at 6 and 24 months after operation, respectively. No local recurrence, prosthesis dislocation, or prosthesis loosening occurred during follow-up. At last follow-up, the MSTS score ranged from 23 to 30, with an average of 25. Conclusion3D printing tecnology, based on 3D multimodality imaging, facilitates precise resection and reconstruction for malignant bone tumors of limbs, resulting in improved oncological and functional outcome.
ObjectivesTo compare the role of problem-based learning (PBL) combined with team-based learning (TBL) methods with traditional lecture-based learning in the clinical probation teaching of bone tumor and explore which teaching method is more suitable for clinical probation teaching of bone tumor.MethodsThe 60 students of the 2013 grade five-year program medical students in West China Clinical College of Sichuan University who were undergoing clinical probation teaching in the orthopedic bone tumor subspecialty of West China Hospital of Sichuan University in April 2017 were randomly divided into 2 groups. The trial group adopted PBL combined with TBL teaching method, the control group adopted traditional teaching method. The general situation of the two groups of students were compared. After the end of the probation, the two groups of students’ knowledge mastery, comprehensive ability and satisfaction were compared.ResultsThere was no significant difference in the gender composition and the assessment scores of the last semester diagnostics course of the two groups of students (P>0.05). After the probation, in terms of knowledge mastery, the trial group’s theoretical test scores (89.13±3.47 vs. 87.03±2.99; t=2.511, P=0.015), teacher evaluation (88.33±4.48 vs. 85.90±3.96; t=2.231, P=0.030) and student evaluation (89.83±2.97 vs. 87.47±2.91; t=3.117, P=0.003) were better than those of the control group. In terms of comprehensive ability, the trial group’s ability in reasoning and induction, information management, goal completion, and communication (17.90±1.09, 18.00±0.91, 18.00±1.02, 17.90±1.13) were better than those of the control group (17.20±1.13, 17.13±1.20, 17.10±1.24, 16.83±1.29), the differences were statistically significant (P<0.05). There was no statistically significant difference in satisfaction between the two groups of students (P>0.05).ConclusionsPBL combined with TBL methods can improve the effect of clinical probation of bone tumors, deepen mastery of professional knowledge, improve comprehensive ability, and improve teaching quality.
ObjectiveTo explore the value of the long time lower abdominal aorta balloon block technology in the pelvis or sacrum tumor surgery. MethodsFrom January 2005 to June 2013, the sacrum or pelvic tumor patients underwent the long time lower abdominal aorta balloon block technology in the Orthopedics Department of West China Hospital of Sichuan University were enrolled. According to the balloon blocking time, patients were divided into A (<90 mins), B (90 to 180 mins), and C (>180 mins) groups. The intraoperative blood loss, blood transfusion amount, average lengths of hospital stay, postoperative volume of drainage, and postoperative complications were compared among the three groups. ResultsA total of 78 patients were included, of which 21 were in group A, 38 were in group B and 19 were in group C. All patients received en bloc resection, and did not experience intraoperative balloon shift and abdominal aorta flow leakage. Comparing the three groups, there were significant differences in intraoperative blood loss (P=0.026) and average lengths of hospital stay (P=0.021). Further pairwise comparison showed the intraoperative blood loss and average lengths of hospital stay in group C were significantly higher than those in group A and group B. In addition, there were no statistical differences among the three groups in blood transfusion amount, postoperative volume of drainage and postoperative complications. ConclusionIn the pelvis and sacrum tumor surgery, extending the time of abdominal aorta balloon block can reduce bleeding, save blood, increase the safety of surgery without increasing in postoperative complications.
ObjectiveTo investigate the clinical efficiency of pelvic and sacrum tumor surgery using sizing balloon occlusion of the lower abdominal aorta. MethodsFrom January 2005 to June 2011, 156 patients were diagnosed to have sacrum or pelvic tumor and underwent surgery in our institution. Temporary balloon occlusion of abdominal aorta was used in 51 patients during the resection of sacrum and pelvic tumors (balloon group). Another 105 patients received the traditional surgery resection (control group). The results of the whole operation time, the volume of blood loss and transfusion, the complication and the total days of stay in hospital in the two groups were compared with each other. ResultsAfter the abdominal aorta was occluded, 92.2% of the patients in the balloon group had holistic resection or edge resection, while the number was 86.7% for the control group. In the balloon group, the average operation time was (171.96±65.16) minutes, the average intraoperative blood loss was (746.86±722.73) mL, and the blood transfusion was (411.76±613.73) mL. The postoperative lead flow was (294.50±146.09) mL, and the postoperative tube removal was within (2.98±1.07) days. Improvement of patients'condition was significantly better than the control group (P<0.05). No significant difference was found in the total days of stay in hospital and the postoperative complications between the two groups (P>0.05). ConclusionUsing abdominal aorta occlusion can effectively control intraoperative hemorrhage, and show the operation field clearly. It also can reduce operation time and control the blood transfusions. Appropriately extended balloon blocking time can obviously improve the tumor removal rate and the safety of the operation.
Objective The rel iable animal model of intervertebral disc degeneration, can provide important experimental carrier to research pathogenesis and treatment of intervertebral disc degeneration. To establ ish three kinds of injury induced rabbit intervertebral disc degeneration models and to compare the characteristics among them by using biochemical and radiological methods. Methods Twenty-five healthy New Zealand white rabbits (weighing 2.0-2.5 kg) were randomly divided into 5 groups (n=5). The L3, 4, L4, 5 and L5, 6 discs in each rabbit were used for study. Groups A and B were forannulus puncture with an 18-gauge needle and a 22-gauge needle, respectively; group C was for nucleus aspiration; group D was for endplate injury and group E was used as a control. The lumbar spinal plain radiographs and magnetic resonance images (MRI) were evaluated, the raltive height of intervertebral disc was measured and the grades of disc degeneration were recorded 2, 4, 8, 16, and 32 weeks after operation. The water and the sulfated-glycosaminoglycan (s-GAG) contents of the nucleus were measured after sacrifice (randomly choose one rabbit from each group at each time point). Results In groups A, B, C and D, the height of intervertebral space in plain radiograph gradually decreased after operation. The anterior bony excrescences of vertebral body and varying degrees of calcification of endplate were also observed. The signal intensity of disc in T2-weighted magnetic resonance imaging decreased with time too. Compared with group E, the significant changes of height of intervertebral discs and grades of disc degeneration in MRI occurred at different time points within 4 weeks in groups A-D (P lt; 0.05). The significant change in groups C and D occured earl ier than in groups A and B. The water and s-GAG contents of discs decreased gradually in groups A-D after operation, while the significant change occurred at varying time points within 8 weeks compared with group E (P lt; 0.05). The apparent downward trend in groups C and D occured earl ier than in groups A and B. Conclusion All three methods are successful in inducing intervertebral disc degeneration. The degenerative process induced by endplate injury and nucleus aspiration is faster and more severe than that induced by annulus puncture.