Objective To summarize the function of fibula in stability of ankle joints.Methods Recent original articles were extensively reviewed, which were related to the physiological function and biomechanical properties of fibula, the influence of fibular fracture on stability of ankle joints and mechanism of osteoarthritis of ankle joints. Results The fibula had the function of weightbearing; and it was generally agreed that discontinued fibula could lead to intra articular disorder of ankle joint in children; but there were various viewpoints regarding the influence of fibular fracture on the ankle joint in adults. Conclusion Fibula may play an important role in stability of ankle joint.
Objective To ascertain whether augmentation pedicle screw fixation with polymethylmethacrylate (PMMA) can enhance the stability of unstable thoracolumbar burst fractures of osteoporotic spine. Methods Six fresh frozen female osteoporotic spines (T10-L5) were harvested and an anterior and posterior columnunstable model of L1 was made. Each specimen was fixated with plate and the stability test were performed by flexion, extension, axial rotation and lateral bending. The test of fatigue was done with MTS 858.The tests were repeated after screws were augmented with PMMA. To compare the biomechanical stability of 6 different conditions:○anormal specimens(control), ○bdefectmodel fixed with plate, not augmented and not fatigued, ○cafter fatigued, not augmented, ○dscrews augmented with PMMA, not fatigued, ○e after augmented and fatigued. ResultsIn ○b,○d and ○e conditions, the ranges of motion(ROM) were 6.23±1.56，4.49±1.00，4.46±1.83 inflexion and 6.60±1.80，4.41±0.82，4.46±1.83 in extension. There was no significant difference (Pgt;0.05), they were significantly smaller than those in ○a and ○c conditions (8.75±1.88，1.47±2.25 and 8.92±2.97，12.24±3.08) (Plt;0.01).Conclusion The results demonstrated that augmentation pedicle screws fixation with PMMA can increase the stability of osteoporotic spine.
Objective To investigate the effects of exogenous bone morphogenetic protein(BMP) and transforming growth factor-β(TGF-β) on biomechanical property for ulna of fracture healing.Methods Thirty-six adult rabbits were made the model of right ulnar fracture and treated locally with TGF-β/PLA, BMP/PLA，TGF-β+BMP/PLA or PLA(as control group). Fracture healing was evaluated by measurement of the mechanical parameters and geometric parameters.Results As compared with control group, the geometric parameters, the bending broken load, the ultimatebending strength, the bending elastic modulus, the ultimate flexural strength, the flexural elastic modulus, the ultimate compressing strength, the compressingelastic modulus, and the ultimate tensile strength for ulna of fracture healingincreased significantly in the treatment groups(P＜0.01). These parameters were higher in TGF-β+BMP/PLA group than in TGF-β/PLA group or in BMP/PLA group andin TGF-β/PLA group than in BMP/PLA group(P＜0.05). There was no significant difference in bone density between the treatment groups and control group. Conclusion Local application of exogenous TGF-β and BMP canincrease the callus formation and enhance biomechanical strength of bone after fracture healing. A combination of TGF-β and BMP has synergetic effect in enhancing fracture healing.
ObjectiveTo compare the strength difference between the interfacial screw and the interfacial screw combined with bone tunnel crossing technology to fix the tibial end of ligament during anterior cruciate ligament (ACL) reconstruction through the biomechanical test.MethodsTwenty fresh frozen pig tibia were randomly divided into two groups (n=10) to prepare ACL reconstruction models. The graft tendons in the experimental group were fixed with interfacial screw combined with bone tunnel crossing technology, and the graft tendons in the control group were fixed with interfacial screw. The two groups of specimens were fixed in the high-frequency dynamic mechanics test system M-3000, and the length change (displacement), ultimate load, and stiffness of graft tendons were measured through the reciprocating test and load-failure test.ResultsThe results of reciprocating test showed that the displacement of the experimental group was (3.06±0.58) mm, and that of the control group was (2.82±0.46) mm, and there was no significant difference between the two groups (t=0.641, P=0.529). The load-failure test results showed that the stiffness of the experimental group and the control group were (95.39±13.63) and (91.38±14.28) N/mm, respectively, with no significant difference (t=1.021, P=0.321). The ultimate load of the experimental group was (743.15±173.96) N, which was significantly higher than that of the control group (574.70±74.43) N (t=2.648, P=0.016).ConclusionIn ACL reconstruction, the fixation strength of tibial end with interface screw combined with bone tunnel crossing technology is obviously better than that of interface screw alone.
In the study of oral orthodontics, the dental tissue models play an important role in finite element analysis results. Currently, the commonly used alveolar bone models mainly have two kinds: the uniform and the non-uniform models. The material of the uniform model was defined with the whole alveolar bone, and each mesh element has a uniform mechanical property. While the material of the elements in non-uniform model was differently determined by the Hounsfield unit (HU) value of computed tomography (CT) images where the element was located. To investigate the effects of different alveolar bone models on the biomechanical responses of periodontal ligament (PDL), a clinical patient was chosen as the research object, his mandibular canine, PDL and two kinds of alveolar bone models were constructed, and intrusive force of 1 N and moment of 2 Nmm were exerted on the canine along its root direction, respectively, which were used to analyze the hydrostatic stress and the maximal logarithmic principal strain of PDL under different loads. Research results indicated that the mechanical responses of PDL had been affected by alveolar bone models, no matter the canine translation or rotation. Compared to the uniform model, if the alveolar bone was defined as the non-uniform model, the maximal stress and strain of PDL were decreased by 13.13% and 35.57%, respectively, when the canine translation along its root direction; while the maximal stress and strain of PDL were decreased by 19.55% and 35.64%, respectively, when the canine rotation along its root direction. The uniform alveolar bone model will induce orthodontists to choose a smaller orthodontic force. The non-uniform alveolar bone model can better reflect the differences of bone characteristics in the real alveolar bone, and more conducive to obtain accurate analysis results.
In the present study, a finite element model of L4-5 lumbar motion segment was established based on the CT images and a combination with image processing software, and the analysis of lumbar biomechanical characteristics was conducted on the proposed model according to different cases of flexion, extension, lateral bending and axial rotation. Firstly, the CT images of lumbar segment L4 to L5 from a healthy volunteer were selected for a three dimensional model establishment which was consisted of cortical bone, cancellous bone, posterior structure, annulus, nucleus pulposus, cartilage endplate, ligament and facet joint. The biomechanical analysis was then conducted according to different cases of flexion, extension, lateral bending and axial rotation. The results showed that the established finite element model of L4-5 lumbar segment was realistic and effective. The axial displacement of the proposed model was 0.23, 0.47, 0.76 and 1.02 mm, respectively under the pressure of 500, 1 000, 1 500 and 2 000 N, which was similar to the previous studies in vitro experiments and finite element analysis of other people under the same condition. The stress distribution of the lumbar spine and intervertebral disc accorded with the biomechanical properties of the lumbar spine under various conditions. The established finite element model has been proved to be effective in simulating the biomechanical properties of lumbar spine, and therefore laid a good foundation for the research of the implants of biomechanical properties of lumbar spine.
ObjectiveTo evaluate the effect of reconstruction of forearm interosseous membrane (IOM) using extensor carpi radialis longus combined with radial head replacement for restoring the forearm longitudinal stability. MethodsTen fresh-frozen adult cadaveric forearms were selected, including 8 males and 2 females with a mean age of 38.2 years (range, 29-74 years). Each forearm was treated as following steps: radial head excision (group A), radial head excision+the distal ulnar radial joints separation (group B), radial head excision+the distal ulnar radial joints separation+IOM central band excision (group C), reconstructed IOM with extensor carpi radialis longus tendon (group D), radial head prothesis replacement (group E), and reconstructed IOM with extensor carpi radialis longus tendon+radial head prothesis replacement (group F). The distance between ulna and radius and radioulnar joint displacement were observed under load and non load. The force loading on both ends of specimen was recorded when the radius shifted 5 mm proximally. ResultsRestoring the radial length could maintain normal distance between radius and ulna. The interosseous membrance reconstruction could restore the load transmission between radius and ulna. The force loading specimen was (74.507±4.967), (49.227±1.940), (17.827±1.496), (24.561±1.390), (140.247±8.029), and (158.423±9.142)N in groups A, B, C, D, E, and F respectively when the radius shifted 5 mm proximally, showing significant difference among groups (P < 0.01). ConclusionReconstruction of the IOM with the extensor carpi radialis longus tendon is insufficient to restore the forearm longitudinal stability. Reconstruction using extensor carpi radialis longus tendon combined with radial head replacement may be a new choice for treatment of forearm longitudinal instability.
This article aims to compare and analyze the biomechanical differences between wing-shaped titanium plates and traditional titanium plates in fixing acetabular anterior column and posterior hemi-transverse (ACPHT) fracture under multiple working conditions using the finite element method. Firstly, four sets of internal fixation models for acetabular ACPHT fractures were established, and the hip joint stress under standing, sitting, forward extension, and abduction conditions was calculated through analysis software. Then, the stress of screws and titanium plates, as well as the stress and displacement of the fracture end face, were analyzed. Research has found that when using wing-shaped titanium plates to fix acetabular ACPHT fractures, the peak stress of screws decreases under all working conditions, while the peak stress of wing-shaped titanium plates decreases under standing and sitting conditions and increases under forward and outward extension conditions. The relative displacement and mean stress of the fracture end face decrease under all working conditions, but the values are higher under forward and outward extension conditions. Wing-shaped titanium plates can reduce the probability of screw fatigue failure when fixing acetabular ACPHT fractures and can bear greater loads under forward and outward extension conditions, improving the mechanical stability of the pelvis. Moreover, the stress on the fracture end surface is more conducive to stimulating fracture healing and promoting bone tissue growth. However, premature forward and outward extension rehabilitation exercises should not be performed.
Objective There is few report on dynamic stabil ization for posterior cervical reconstruction. To investigate the biomechanical properties of a novel cervical spine posterior fixation using the bio-derived freeze-dried tendon in posterior cervical spine reconstruction. Methods The palmaris longus flexor tendon and metacarpal extensor tendon were collected from the death donors’ stump to prepare bio-derived tendon. Twenty fresh cervical vertebrae (C1-7) were harvested from goats and were randomly divided into 4 groups (n=5): intact group (group A); injury control group (group B); screwrods fixation group, fixed with screw-rods on C3，4 (group C); tendon reconstruction group, cross-fixed with bio-derived freezedried tendon on C3，4 bilatera facet joints (group D). The range of motion (ROM) values in flexion, extension, lateral bending, and axial rotation were measured. Results In flexion, the ROM values of group C were significantly lower than those of the other 3 groups (P lt; 0.05), and the ROM values of group B were significantly higher than those of groups A and D (P lt; 0.05). In extension, lateral bending, and axial rotation, the ROM values of group C were significantly lower than those of groups A, B, and D (P lt; 0.05), and no significant difference was found within the other 3 groups (P gt; 0.05). Conclusion The novel cervical spine posterior fixation using the bio-derived frozen-dried tendon can provide enough stabil ity in flexion motion, but it can not limit the lateral bending and axial rotation motion, which can provide dynamic stabil ization in animal model.
Objective To make a comparison for the change of maximum tensile intensity and stiffness of a whole implant that is placed into bone tunnel with various lengths tendon, by using beagle dog’s autogenous flexor tendons to reconstruct anterior cruciate l igament (ACL). Methods Sixty male beagle dogs were included in the experiment (weighting 13-16 kg). Three dogs were used for intact flexor tendon of both knees (normal control group), 3 dogs for the intact ACL andfemur-graft-tibia complex (auto control group) and 54 dogs (108 knees) for models of reconstructed ACL (6 experimentalgroups according to different lengths of tendon: 5, 9, 13, 17, 21 and 25 mm in the bone tunnel). The tensile intensity and stiffness were measured after 45, 90 and 180 days separately after operation. Results In the normal control group, the maximum tensile intensity of the intact flexor tendon was (564.15 ± 36.18) N, the stiffness was (59.89 ± 4.28) N/ mm. In the auto control group, the maximum tensile intensity of the intact ACL was (684.75 ± 48.10) N, the stiffness was (74.34 ± 6.99) N/ mm, all ruptured through the intra-articular portion of the graft. The maximum tensile intensity of femur-graft-tibia complex in the auto control group was (301.92 ± 15.04) N, the stiffness was (31.35 ± 1.97) N/mm. After 45 days of operation, all failure occurred at the tibial or femoral insertion site. After 90 days of operation, 24 of the breakpoints were scattered in tendon-bone junction, 12 (3 in 17 mm group, 5 in 21 mm group, 4 in 25 mm group) ruptured through the intra-articular portion. After 180 days of the operation, all breakpoints were distributed inside joint of the implant. The maximum tensile intensity and the stiffness were ber in 17, 21 and 25 mm groups than in 5, 9 and 13 mm groups after operation (P lt; 0.05). Conclusion Tendon with 17 mm length, which will be implanted into bone tunnel, is an appl icable index, in reconstruction of ACL by autogenous tendons.