3D printing technology has a promising prospect of medical use and clinical value, and may play an important role in the field of thoracic and cardiovascular surgery, such as preoperative diagnosis, surgical planning, surgical approach alternatives and organ replacement. This review focuses on the development of 3D printing technology in recent years and its use and prospect in the field of thoracic and cardiovascular surgery including surgical teaching and simulation, personalized prosthesis implantation, and artificial organ transplantation.
Congenital tracheal stenosis (CTS) is a rare but potentially life-threatening disease which results in congnital airway lesion. CTS is often associated with cardiovascular anomalies and presented with a wide spectrum of symptoms. CTS has challenged pediatric surgeons for decades. Various classic approaches and new techniques, including computational fluid dynamics, tissue-engineering trachea, and 3D printing have been proposed for diagnosis and treatment of CTS. This review provides a snapshot of the main progress of diagnosis and treatment of CTS.
ObjectiveTo evaluate the clinical value of in vitro fenestration and branch stent repair in the treatment of thoracoabdominal aortic aneurysm in visceral artery area assisted by 3D printing.MethodsThe clinical data of 7 patients with thoracoabdominal aortic aneurysm involving visceral artery at the Department of Vascular Surgery, Shandong Provincial Hospital Affiliated to Shandong First Medical University from March 2016 to May 2019 were analyzed retrospectively. There were 5 males and 2 females with an average age of 70.2±3.9 years. Among them 4 patients had near-renal abdominal aortic aneurysm, 3 had thoracic aortic aneurysm, 4 had asymptomatic aneurysm, 2 had acute symptomatic aneurysm and 1 had threatened rupture of aneurysm. According to the preoperative CT measurement and 3D printing model, fenestration technique was used with Cook Zenith thoracic aortic stents, and branch stents were sewed on the main stents in vitro, and then the stents were modified by beam diameter technique for intracavitary treatment.ResultsAll the 7 patients completed the operation successfully, and a total of 18 branch arteries were reconstructed. The success rate of surgical instrument release was 100.0%. The average operation time was 267.0±38.5 min, the average intraoperative blood loss was 361.0±87.4 mL and the average hospital stay was 16.0±4.2 d. Immediate intraoperative angiography showed that the aneurysms were isolated, and the visceral arteries were unobstructed. Till May 2019, there was no death, stent displacement, stent occlusion, ruptured aneurysm or loss of visceral artery branches. Conclusion3D printing technology can completely copy the shape of human artery, intuitively present the anatomical structure and position of each branch of the artery, so that the fenestration technique is more accurate and the treatment scheme is more optimized.
Objective To evaluate the deviation between actual and simulated screw placement after cervical pedicle screw placement assisted by 3D printed navigation template, and analyze the correlation between screw placement deviation and navigation pipe length. Methods A total of 40 patients undergoing cervical 1-7 pedicle screw insertion assisted by 3D printed navigation template in Zigong Fourth People’s Hospital between February 2018 and August 2020 were included in this prospective study. These patients were divided into 3 groups randomly, including 12 patients with a 5-mm pipe length (5 mm group), 13 patients with a 10-mm pipe length (10 mm group), and 15 patients with a 15-mm pipe length (15 mm group). Three-dimensional modeling was performed on preoperative cervical CT images of these patients and simulated pedicle screw was placed. Individualized pedicle screw navigation templates were designed according to the position and direction of simulated pedicle screws, and 3D printing was performed on the cervical model and navigation templates. Preoperative 3D printed model and navigation templates were used to simulate the surgical process to confirm the safety of screws. During the operation, pedicle screw placement was performed according to the preoperative design and simulated surgical process. The postoperative CT images were registered with the preoperative CT images in 3D model. The safety of screw placement was evaluated by the postoperative screw placement Grade, and the accuracy of screw placement was evaluated by measuring the deviation of screw placement point and the deviation of screw placement direction in horizontal plane (inclination angle) and sagittal plane (head inclination angle). The influence of different navigation pipe lengths on the safety and accuracy of screw placement was analyzed. Results A total of 164 pedicle screws were inserted with navigation template assistance, including 48 screws (38 in Grade 0 and 10 in Grade 1) in the 5 mm group, 52 screws in the 10 mm group (all in Grade 0), and 64 screws (52 in Grade 0 and 12 in Grade 1) in the 15 mm group, and the difference in the grade among the three groups was statistically significant (P<0.05). When the navigation pipe length was 5, 10, and 15 mm, respectively, the screw entry point deviation was (1.87±0.63), (1.44±0.63), and (1.66±0.54) mm, respectively, the inclination angle deviation was (2.72±0.25), (0.90±0.21), and (1.84±0.35)°, respectively, and the head inclination angle deviation was (8.63±1.83), (7.15±1.38), and (8.24±1.52)°, respectively. The deviations in the 10 mm group were all significantly less than those in the other two groups (P<0.05). Conclusions In the cervical pedicle screw placement assisted by navigation template, all the screws were Grade 0 or Grade 1, with high safety. The mean deviation of the screw entry point is within 2 mm, with high accuracy. When the length of navigation pipe is 10 mm, the safety and accuracy of screw placement can be fully guaranteed.
The incidence of valvular heart disease (VHD) increases with age, and its principal therapy is valve replacement. However, in recent years, the emergence of transcatheter interventions has changed the traditional therapy, making high-risk patients of surgery see dawn of hope. 3D printing technology has developed rapidly since it was applied to the medical field in 1990. Moreover, it has been widely applied in many surgical majors via refined reduction technology. However, the application of 3D printing technology in cardiovascular surgery is still in the preliminary stage, especially in the field of VHD. This article aims to review basic principles of 3D printing technology, its advantages in the therapy of VHD, and its current status of clinical application. Furthermore, this article elaborates current problems and looks forward to the future development direction.
Objective To evaluate the effect of the 3D-printed heart model on congenital heart disease (CHD) education through systematic review and meta-analysis. Methods The literature about the application of the 3D-printed heart model in CHD education was systematically searched by computer from PubMed, Web of Science, and EMbase from inception to November 10, 2022. The two researchers independently screened the literature, extracted data and evaluated the quality of the literature. Cochrane literature evaluation standard was used to evaluate the quality of randomized controlled trials, and JBI evaluation scale was used for cross-sectional and cohort studies. ResultsAfter screening, 23 literatures were included, including 7 randomized controlled trials, 15 cross-sectional studies and 1 cohort study. Randomized controlled trials were all at low-risk, cross-sectional studies and and the cohort study had potential bias. There were 4 literatures comparing 3D printing heart model with 2D image teaching and the meta-analysis result showed that the effect of 3D printing heart model on theoretical achievement was more significant compared with 2D image teaching (SMD=0.31, 95%CI –0.28 to 0.91, P=0.05). Conclusion The application of the 3D-printed heart model in CHD education can be beneficial. But more randomized controlled trials are still needed to verify this result.
ObjectiveTo explore clinical value of 3D printing technology in hepatic resection. MethodsFrom March to May 2015, multidetector-row computed tomography images of 12 patients, including hepatic carcinoma in 6, hepatic hemangioma in 3, intra-and extra-hepatic bile duct stones in 3, were used for 3D hepatic reconstruction, the final segmentation data were converted to stereolithography files for 3D printing, 50%-70% scale of the full-sized liver model was fabricated by polylactic acid to be used to analyze its anatomical structure, design surgical planning, select the optimal operative route and simulate hepatic resection. Hepatic resection was performed by referring to the 3D printing model. ResultsThe hepatic resections were successful without complications by referring to the preoperative 3D printing models, the average blood loss was 340(100-1000) mL. ConclusionHepatic resection is more accurate and safe by 3D printing technology.
ObjectiveTo explore the influence of 3D printing assisting educational intervention on the anxiety and sleep outcomes in the patients with trauma. MethodA total of 40 patients were selected between October 2014 and June 2015. The patients were randomly divided into the intervention group and control group with 20 patients in each. The outcomes from admitted to the 7th day after the surgery were evaluated, including visual analogue scale (VAS) scores, state-trait anxiety inventory (STAI) score, Likert score, and the condition of anxiety, pain, and sleep outcomes. ResultsThe differences in VAS scores, STAI scores, and Likert scores between the two groups were significant (P<0.05). Conclusions3D printing assisting educational intervention is a useful intervention that can improve post-operative outcomes for the patients with trauma.
Objective To evaluate the application of three-dimensional printing technique in surgical treatments on complex congenital heart diseases. Methods Two patients were enrolled with complex congenital heart diseases. The computerized tomography data were used to build the 3D architecture of cardiac anomalies. The White-Jet-Process technique was used to print the models with 1∶1 ratio in size. The models were used to make the treatment strategy making, young surgeon training and operation simulation. Results The full color and hollowed-out cardiac models with 1∶1 ration in size were printed successfully. They were transected at the middle point of vertical axis, which was conveniently to explore the intracardiac anomalies. However, for patient 1, the model lost the atrial septal defect. Taking the two models as references, operation group held preoperative consultation, operation simulation, and finally, the operation plans were determined for the two patients. Both the two operation were carried out smoothly. Conclusion Although the limitations of 3D printing still exist in the application for congenital heart diseases, making the preoperative plan and operation simulation via 3D cardiac model could enhance the understanding of following operation and procedure details, which could improve the tacit cooperation among operation group members. Furthermore, operation results also could be improved potentially. Therefore, the cardiac 3D printing should be popularized in clinic in the future.
ObjectiveTo explore the feasibility of lumbar puncture models based on 3D printing technology for training junior orthopaedic surgeons to find the optimal pedicle screw insertion points.MethodsMimics software was used to design 3D models of lumbar spine with the optimal channels and alternative channels. Then, the printed lumbar spine models, plasticine, and cloth were used to build lumbar puncture models. From January 2018 to June 2019, 43 orthopedic trainees performed simulated operations to search for the insertion points of pedicle screws base on the models. The operations were performed once a day for 10 consecutive days, and the differences in operation scores and operation durations of the trainees among the 10 days were compared.ResultsAll the trainees completed the surgical training operations successfully, and there were significant differences in the operation scores (13.05±2.45, 14.02±3.96, 17.58±3.46, 21.02±2.04, 23.40±4.08, 25.14±3.72, 27.26±6.09, 33.37±4.23, 35.00±4.15, 38.49±1.70; F=340.604, P<0.001) and operation durations [(22.51±4.28), (19.93±4.28), (18.05±2.89), (17.05±1.76), (16.98±1.97), (15.47±1.74), (13.51±1.42), (12.60±2.17), (12.44±1.71), (11.91±1.87) minutes; F=102.359, P<0.001] among the 10 days.ConclusionThe 3D models of lumbar puncture are feasible and repeatable, which can contribute to surgical training.