Thoracolumbar fractures are common injuries. Accurate diagnosis and classification are of great significance for guiding treatment. Although there are many classification systems, they have not been universally accepted and used to guide clinical practice. Denis classification, load sharing classification, Magerl/AO classification, and Thoracolumbar Injury Classification and Severity Score have a great clinical influence, but they also have some shortcomings. Recently, some new classifications of thoracolumbar fractures have been proposed, and some of them have been updated and revised, which makes it easy to cause confusion, and puts forward new requirements on how to grasp and apply these classification systems. This article reviews the main and commonly used classification systems of thoracolumbar fractures, discusses the main viewpoints, advantages and disadvantages of each classification system, and looks ahead to the future research direction.
Objective To review current status of surgical treatment for angular kyphosis in spinal tuberculosis and provide reference for clinical treatment. Methods The literature on the surgical treatment for angular kyphosis of spinal tuberculosis in recent years was extensively reviewed and summarized from the aspects of surgical indications, surgical contraindications, surgical approach, selection of osteotomy, and perioperative management. Results Angular kyphosis of spine is a common complication in patients with spinal tuberculosis. If kyphosis progresses gradually, it is easy to cause neurological damage, deterioration, and delayed paralysis, which requires surgical intervention. At present, surgical approaches for angular kyphosis of the spine include anterior approach, posterior approach, and combined anterior and posterior approaches. Anterior approach can be performed for patients with severe spinal cord compression and small kyphotic Cobb angle. Posterior approach can be used for patients with large kyphotic Cobb angle but not serious neurological impairment. A combined anterior and posterior approaches is an option for spinal canal decompression and orthosis. Osteotomy for kyphotic deformity include Smith-Peterson osteotomy (SPO), pedicle subtraction osteotomy (PSO), vertebral column resection(VCR), vertebral column decancellation (VCD), posterior vertebral column resection (PVCR), deformed complex vertebral osteotomy (DCVO), and Y-shaped osteotomy. SPO and PSO are osteotomy methods with relatively low surgical difficulty and low surgical risks, and can provide 15°-30° angular kyphosis correction effect. VCR or PVCR is a representative method of osteotomy and correction. The kyphosis correction can reach 50° and is suitable for patients with severe angular kyphosis. VCD, DCVO, and Y-shaped osteotomy are emerging surgical techniques in recent years. Compared with VCR, the surgical risks are lower and the treatment effects also improve to varying degrees. Postoperative recovery is also a very important part of the perioperative period and should be taken seriously. Conclusion There is no consensus on the choice of surgical treatment for angular kyphosis in spinal tuberculosis. Osteotomy surgery are invasive, which is a problem that colleagues have always been concerned about. It is best to choose a surgical method with less trauma while ensuring the effectiveness.
ObjectiveTo evaluate the short-term effectiveness of percutaneous endoscopic lumbar discectomy (PELD) in treatment of buttock pain associated with lumbar disc herniation.MethodsBetween June 2015 and May 2016, 36 patients with buttock pain associated with lumbar disc herniation were treated with PELD. Of 36 cases, 26 were male and 10 were female, aged from 18 to 76 years (mean, 35.6 years). The disease duration ranged from 3 months to 10 years (mean, 14 months). The location of the pain was buttock in 2 cases, buttock and thigh in 6 cases, buttock and the ipsilateral lower extremity in 28 cases. Thirty-four patients had single-level lumbar disc herniation, and the involved segments were L4, 5 in 15 cases and L5, S1 in 19 cases; 2 cases had lumbar disc herniation at both L4, 5 and L5, S1. The preoperative visual analogue scale (VAS) score of buttock pain was 6.1±1.3. VAS score was used to evaluate the degree of buttock pain at 1 month, 3 months, 6 months, and last follow-up postoperatively. The clinical outcome was assessed by the modified MacNab criteria at last follow-up.ResultsAll patients were successfully operated and the operation time was 27-91 minutes (mean, 51 minutes). There was no nerve root injury, dural tear, hematoma formation, or other serious complications. The hospitalization time was 3-8 days (mean, 5.3 days). All incisions healed well and no infection occurred. Patients were followed up 12-24 months (median, 16 months). MRI examination results showed that the dural sac and nerve root compression were sufficiently relieved at 3 months after operation. Patients obtained pain relief after operation. The postoperative VAS scores of buttock pain at 1 month, 3 months, 6 months, and last follow-up were 1.1±0.6, 0.9±0.3, 1.0±0.3, and 0.9±0.4 respectively, showing significant differences when compared with preoperative VAS scores (P<0.05); there was no significant difference in VAS score between the different time points after operation (P>0.05). At last follow-up, according to the modifed MacNab criteria, the results were excellent in 27 cases, good in 9 cases, and fair in 2 cases, and the excellent and good rate was 94.4%.ConclusionPELD can achieve satisfactory short-term results in the treatment of buttock pain associated with lumbar disc herniation and it is a safe and effective minimally invasive surgical technique.
Traditional bone repair materials, such as titanium, polyetheretherketone, and calcium phosphate, exhibit limitations, including poor biocompatibility and incongruent mechanical properties. In contrast, ceramic-polymer composite materials combine the robust mechanical strength of ceramics with the flexibility of polymers, resulting in enhanced biocompatibility and mechanical performance. In recent years, researchers worldwide have conducted extensive studies to develop innovative composite materials and manufacturing processes, with the aim of enhancing the bone repair capabilities of implants. This article provides a comprehensive overview of the advancements in ceramic-polymer composite materials, as well as in 3D printing and surface modification techniques for composite materials, with the objective of offering valuable insights to improve and facilitate the clinical application of ceramic-polymer composite materials in the future.
Objective To summarize the advances in MRI-based bone quality scoring systems and their clinical applications. Methods A comprehensive literature review was conducted on recent studies related to the MRI-based bone quality scoring system, focusing on measurement methods, influencing factors, and clinical significance. Results Osteoporosis has a high incidence in China, significantly impacting patients’ quality of life and the postoperative outcomes of related orthopedic surgeries. Early identification of osteoporosis holds important clinical significance. In recent years, both domestic and international research has enriched the MRI-based bone quality scoring systems, which includes vertebral bone quality scoring, endplate bone quality scoring, and pedicle bone quality scoring. Compared to the “gold standard” of bone density measurement, dual-energy X-ray absorptiometry, the bone quality scoring systems demonstrate good efficacy in identifying abnormal bone mass and predicting postoperative complications, while being less influenced by degenerative changes in the lumbar spine, indicating its important clinical application value. ConclusionThe MRI-based bone quality scoring systems have good value in clinical applications. However, current studies are mostly retrospective cohort and case-control studies, which carry a risk of bias. The clinical application value needs further clarification through meta-analysis and large-scale prospective studies.
Congenital scoliosis is the presence of a sideways curvature of the spine caused by the failure of normal vertebral development. Congenital scoliosis is usually progressive, and surgical treatment is crucial for the treatment of congenital scoliosis. Surgical treatments of congenital scoliosis mainly include simple fusion surgery, hemivertebrae excision, growing rods technique, and vertical expandable prosthetic titanium rib. However, there is no uniform standard for the selection of surgical techniques and surgical timing. This article reviews the progress of different surgical treatments for congenital scoliosis, introduces the classification of congenital scoliosis, and clarifies the timing, pros and cons of different surgical techniques, aiming to provide a reference for the development of individualized optimal surgical plans for patients with congenital scoliosis.
Objective To discuss the effectiveness and the safety of accurate decompression via foraminoplasty in treating lumbar lateral recess stenosis patients who accompanied by disk-flavum ligamentum space and bony lateral recess stenosis, and to analysis the short-term effectiveness of the surgical procedures. Methods Forty-five lumbar lateral recess stenosis patients accompanied by disk-flavum ligamentum space and bony lateral recess stenosis were treated by accurate decompression via foraminoplasty between January 2013 and January 2016. There were 29 males and 16 females with a median age of 58 years (range, 42-82 years). The disease duration was 3-96 months (mean, 24.4 months). The lesion segment included L4, 5 in 36 cases and L5, S1 in 9 cases. The visual analogue scale (VAS) score of low back pain and leg pain at preoperation and last follow-up were recorded, and the modified Macnab criteria was used to evaluate the effectiveness at last follow-up. Postoperative CT and MRI were reviewed to evaluate the stability and decompression of the lumbar spine. Results All operations were successfully completed. All the 45 patients were followed up 3-18 months (median, 11 months). Dural tear occurred in 2 cases during operation, bone graft removed into the spinal canal in 1 case, postoperative low back pain occurred in 5 cases, and there was no nerve root injury, hematoma formation, or other complications. The leg pain VAS score at last follow-up (0.6±1.2) was significantly improved when compared with preoperative score (5.7±1.4) (t=8.981, P=0.001); and the low back pain VAS scores showed no significant difference between preoperation and last follow-up (1.5±1.3vs. 1.7±1.4;t=0.535, P=0.585). According to the modified Macnab criteria, the results were excellent in 20 cases, good in 22 cases, fair in 2 cases, and poor in 1 case at last follow-up, and the excellent and good rate was 93.3%. Conclusion Accurate decompression via foraminoplasty is an effective, safe, and less invasive way for treating lumbar recess stenosis patients accompanied by disk-flavum ligamentum space and bony lateral recess stenosis.
ObjectiveTo evaluate the effectivity and safety of posterior osteotomy for thoracolumbar stress fracture in ankylosing spondylitis (AS) through the gap of a pathological fracture.MethodsBetween April 2012 and August 2015, 8 patients with AS combined with thoracolumbar stress fracture were treated with posterior osteotomy through the gap of a pathological fracture to correct the kyphosis. There were 7 males and 1 female, with an average age of 51 years (range, 37-74 years). The history of AS was 1-40 years (mean, 21.7 years) and disease duration of stress fracture was 2-60 months (mean, 18.5 months). The segmental lesions included T8, 9 in 1 case, T10, 11 in 2 cases, T11 in 2 cases, T12, L1 in 1 case, L1, 2 in 1 case, and L2, 3 in 1 case. The nerve function before operation according to Frankel grading was grade D in 3 cases and grade E in 5 cases. The pre- and post-operative X-ray films, CT three-dimensional reconstruction, and MRI were collected to measure the global kyphosis (GK), local kyphosis (LK), angle of the fusion levels (AFL), pelvic incidence (PI), pelvic tilt (PT), and sagittal vertical axis (SVA). Visual analogue scale (VAS) score was used to assess the back pain intensity.ResultsThe operation time was 210-320 minutes (mean, 267 minutes), and the intraoperative blood loss was 400-2 000 mL (mean, 963 mL). Cerebrospinal fluid leakage was found in 3 patients, and the wound healed by removal of drainage tube and suturing drainage outlet after 5-7 days of operation. The wounds of the rest patients healed by first intention. Lower extremity numbness occurred in 1 case and recovered after 1 month of postoperative administration of oral mecobalamin. All the patients were followed up 20-43 months (mean, 28.4 months). No internal fixator loosening, fracture, and other complications occurred. All the fractures healed with the healing time of 3-12 months (mean, 6.8 months). At 3 months after operation, 3 cases with spinal cord injury of preoperative Frankel grade D recovered to grade E. The GK, LK, AFL, PI, PT, SVA, and VAS scores at 1 week after operation and at last follow-up were significantly improved when compared with preoperative ones (P<0.05). Except for VAS score at last follow-up was significantly improved when compared with that at 1 week after operation (P<0.05), there was no significant difference in the other indexes between at 1 week after operation and at last follow-up (P>0.05).ConclusionPosterior osteotomy through the gap of a pathological fracture is a safe and effective surgical procedure for kyphosis correction and relief of back pain in AS patients combined with thoracolumbar stress fracture. Successful bony fusion and good clinical outcomes can also be achieved by this surgical procedure.
With the development of three-dimensional (3D) printing technology, more and more researches have focused on its application in the region of intervertebral fusion materials; the prospects are worth looking forward to. This article reviews the researches about 3D printing technology in spinal implants, and summarizes the materials and printing technology applied in the field of spinal interbody fusion, and the shortcomings in the current research and application. With the rapid development of 3D printing technology and new materials, more and more 3D printing spinal interbodies will be developed and used clinically.
Objective To investigate the feasibility, effectiveness, and security of percutaneous endoscopic spine surgery for treatment of lumbar spine disorders with intraspinal ossification. Methods Between July 2008 and June 2016, 96 patients with lumbar spine disorders (lumbar disc herniation or lumbar spinal stenosis) with intraspinal ossification were treated with percutaneous endoscopic spine surgery. There were 59 males and 37 females, aged from 13 to 57 years (mean, 29.5 years). The disease duration was 3-51 months (mean, 18.2 months). Fifty-one cases had trauma history. Ninety-two cases were single segmental unilateral symptom, 4 cases were bilateral symptom. The ossification property was posterior ring apophysis separation in 89 cases, and ossification of the fibrous ring or posterior longitudinal ligament in 7 cases. There were 32 cases of lateral type, 13 cases of central type, and 51 cases of mixed type. The pressure factors, such as nucleus pulposus, hyperplasia of the yellow ligament, joint capsule, or articular osteophyma, were removed under the microscope. Local anesthesia or continuous epidural anesthesia was performed in the transforaminal approach with 50 cases, and continuous epidural anesthesia or general anesthesia was performed in the interlaminar approach with 46 cases. The visual analogue scale (VAS) score was used to evaluate the degree of leg pain preoperatively and at last follow-up. The effectiveness was evaluated at last follow-up according to the modified Macnab criteria. Results All patients were successfully operated. Via transforaminal approach, the mean operation time was 53 minutes and the mean intraoperative fluoroscopy times was 8 times; and via interlaminar approach was 58 minutes and 3 times, respectively. The mean bed rest time after operation was 6.5 hours and the mean hospitalization time was 4.7 days. All patients were followed up 6-18 months (median, 11 months). Postoperative lumbar CT scan and three-dimensional reconstruction after 3 days of operation showed that ossification tissues of 26 cases were not resected, 12 cases were resected partly, and 49 cases were resected completely. Postoperative lumbar MRI after 3 months of operation showed that spinal cord and nerve root were not compressed. At last follow-up, VAS score of leg pain was 0.7±1.1, which was significantly lower than preoperative score (5.8±1.1) (t=1.987, P=0.025). At last follow-up, according to modified Macnab criteria, the results were excellent in 87 cases, good in 5 cases, and fair in 4 cases, and the excellent and good rate was 95.8%. Conclusion Percutaneous endoscopic spine surgery for treatment of lumbar spine disorders with intraspinal ossification is an effective, safe, and minimal invasive alternative, and the short-term effectiveness is reliable. Accounting for the treatment of intraspinal ossification, comprehensive analysis should be made by combining clinical symptoms, imaging characteristics, and risk assessment.