ObjectiveTo summarize the research progress of tissue engineering technology to promote bone tissue revascularization in osteonecrosis of the femoral head (ONFH).MethodsThe relevant domestic and foreign literature in recent years was extensively reviewed. The mechanism of femoral head vascularization and the application progress of tissue engineering technology in the promotion of ONFH bone tissue revascularization were summarized.ResultsRebuilding or improving the blood supply of the femoral head is the key to the treatment of ONFH. Tissue engineering is a hot spot in current research. It mainly focuses on the three elements of seed cells, scaffold materials, and angiogenic growth factors, combined with three-dimensional printing technology and drug delivery systems to promote the revascularization of the femoral bone tissue.ConclusionThe strategy of revascularization of the femoral head can improve the local blood supply and delay or even reverse the progression of ONFH disease.
Objective To investigate the effectiveness of high tibial osteotomy (HTO) combined with arthroscopic surgery to treat medial compartment knee osteoarthritis (KOA) and secondary arthroscopic exploration to evaluate the outcome of cartilage and meniscus.Methods A clinical data of 57 patients with medial compartment KOA with varus deformity of lower extremities admitted between August 2014 and October 2018 were retrospectively analyzed. There were 23 males and 34 females with an average age of 51.2 years (range, 41-63 years). The disease duration ranged from 2 to 8 years, with an average of 4.7 years. The preoperative femorotibial angle was (179.86±4.69)°, the relative position of the lower limb mechanical axis passing through the tibial plateau was 24.21%±6.98%, and the posterior slope of the tibial plateau was (5.23±1.45)°. The Kellgren-Lawrence grade of knee joint was grade Ⅱ in 22 cases and grade Ⅲ in 35 cases. The preoperative Hospital for Special Surgery (HSS) score, Lysholm score, and visual analogue scale (VAS) score were 59.1±7.3, 48.8±7.6, and 6.2±1.1, respectively. Arthroscopic exploration was performed during the operation to record the articular cartilage degeneration in the weight-bearing area of the medial compartment (Outerbridge grade Ⅰ in 18 cases, grade Ⅱ in 30 cases, and grade Ⅲ in 9 cases) and the condition of the medial meniscus injury, and the corresponding treatment was performed. The coronal force line was adjusted according to the preoperative Kellgren-Lawrence grade of the knee joint during the operation. After operation, the relative position of the lower limb mechanical axis passing through the tibial plateau, the femorotibial angle, and the posterior slope of the tibial plateau were measured; the Kellgren-Lawrence grade of the knee joint was recorded; the Outerbridge grade of articular cartilage degeneration and the meniscus outcome were evaluated by combining with the MRI of the knee joint at 1 year after operation and the second arthroscopic exploration when the internal fixator was removed. The function and pain of the knee were evaluated by Lysholm score, HSS score, and VAS score. ResultsAll the 57 patients were followed up 36-58 months with an average of 42.1 months. Incisions healed by first intention, and no neurovascular injury, intraarticular or hinge fractures occurred during operation, and no postoperative complications such as deep vein thrombosis of lower limbs and internal fixation failure occurred. All the osteotomy sites healed at 3 months after operation. At 1 year after operation, the internal fixator was removed, and the second arthroscopic exploration showed that there were 15 cases of Outerbridge grade Ⅰ, 31 cases of grade Ⅱ, and 11 cases of grade Ⅲ in the weight-bearing area of the medial compartment, and there was no significant difference when compared with preoperative grade (Z=31.992, P=0.997); there was no cartilage degeneration in other compartments. Meniscus healing was seen in the injured meniscus, and no injury was seen in the normal meniscus. At last follow-up, there were 19 cases of Kellgren-Lawrence grade Ⅱ and 38 cases of grade Ⅲ, and there was no significant difference when compared with preoperative grade (Z=49.049, P=0.764). The relative position of the lower limb mechanical axis passing through the tibial plateau was 59.16%±2.87%, and the femorotibial angle was (171.54±3.39)°, which significantly improved when compared with those before operation (P<0.001). The posterior slope of the tibial plateau was (5.65±1.22)°, which was not significantly different from that before operation (t=−1.673, P=0.096). The HSS score, Lysholm score, and VAS score were 82.3±7.7, 83.4±6.4, and 1.6±1.1 respectively, which were significantly different from those before operation (P<0.001). Conclusion HTO combined with arthroscopic surgery for medial compartment KOA with varus deformity of lower extremities can effectively improve the force line of lower extremities, relieve pain symptoms, and improve joint function, with satisfactory short-term effectiveness, and without significant progress in articular cartilage or meniscus injury after operation.
Objective To compare the biomechanical properties of personalized Y-shaped plates with horizontal plates, vertical plates, and traditional Y-shaped plates in the treatment of distal humeral intra-articular fractures through finite element analysis, and to evaluate their potential for clinical application. Methods The study selected a 38-year-old male volunteer and obtained a three-dimensional model of the humerus by scanning his upper limbs using a 64-slice spiral CT. Four types of fracture-internal fixation models were constructed using Mimics 19.0, Geomagic Wrap 2017, Creo 6.0, and other software: horizontal plates, vertical plates, traditional Y-shaped plate, and personalized Y-shaped plate. The models were then meshed using Hypermesh 14.0 software, and material properties and boundary conditions were defined in Abaqus 6.14 software. AnyBody 7.3 software was used to simulate elbow flexion and extension movements, calculate muscle strength, joint forces, and load torques, and compare the peak stress and maximum displacement of the four fixation methods at different motion angles (10°, 30°, 50°, 70°, 90°, 110°, 130°, 150°) during elbow flexion and extension. Results Under dynamic loading during elbow flexion and extension, the personalized Y-shaped plate exhibits significant biomechanical advantages. During elbow flexion, the peak internal fixation stress of the personalized Y-shaped plate was (28.8±0.9) MPa, which was significantly lower than that of the horizontal plates, vertical plates, and traditional Y-shaped plate (P<0.05). During elbow extension, the peak internal fixation stress of the personalized Y-shaped plate was (18.1±1.6) MPa, which was lower than those of the other three models, with significant differences when compared with horizontal plates and vertical plates (P<0.05). Regarding the peak humeral stress, the personalized Y-shaped plate model showed mean values of (10.9±0.8) and (13.1±1.4) MPa during elbow flexion and extension, respectively, which were significantly lower than those of the other three models (P<0.05). Displacement analysis showed that the maximum displacement of the humerus with the personalized Y-shaped plate during elbow flexion was (2.03±0.08) mm, slightly higher than that of the horizontal plates, but significantly lower than that of the vertical plates, showing significant differences (P<0.05). During elbow extension, the maximum displacement of the humerus with the personalized Y-shaped plate was (1.93±0.13) mm, which was lower than that of the other three models, with significant differences when compared with vertical plates and traditional Y-shaped plates (P<0.05). Stress contour analysis showed that the stress of the personalized Y-shaped plate was primarily concentrated at the bifurcation of the Y-shaped structure. Displacement contour analysis showed that the personalized Y-shaped plate effectively controlled the displacement of the distal humerus during both flexion and extension, demonstrating excellent stability. ConclusionThe personalized Y-shaped plate demonstrates excellent biomechanical performance in the treatment of distal humeral intra-articular fractures, with lower stress and displacement, providing more stable fixation effects.
Objective To investigate whether human amniotic mesenchymal stem cells (hAMSCs) have the characteristics of mesenchymal stem cells (MSCs) and the differentiation capacity into ligament fibroblastsin vitro. Methods The hAMSCs were separated through trypsin and collagenase digestion from placenta, the phenotypic characteristics of hAMSCs were detected by flow cytometry, the cytokeratin-19 (CK-19) and vimentin expression of hAMSCs were tested through immunofluorescence staining. The hAMSCs at the 3rd passage were cultured with L-DMEM/F12 medium containing transforming growth factor β1 (TGF-β1) and vascular endothelial growth factor (VEGF) as the experimental group and with single L-DMEM/F12 medium as the control group. The morphology of hAMSCs was observed by inverted phase contrast microscope; the cellular activities and ability of proliferation were examined by cell counting kit-8 (CCK-8) method; the ligament fibroblasts related protein expressions including collagen type I, collagen type III, Fibronectin, and Tenascin-C were detected by immunofluorescence staining; specific mRNA expressions of ligament fibroblasts and angiogenesis including collagen type I, collagen type III, Fibronectin, α-smooth muscle actin (α-SMA), and VEGF were measured by real-time fluorescence quantitative PCR. Results The hAMSCs presented monolayer and adherent growth under inverted phase contrast microscope; the flow cytometry results demonstrated that hAMSCs expressed the MSCs phenotypes; the immunofluorescence staining results indicated the hAMSCs had high expression of the vimentin and low expression of CK-19; the hAMSCs possessed the differentiation ability into the osteoblasts, chondroblasts, and lipoblasts. The CCK-8 results displayed that cells reached the peak of growth curve at 7 days in each group, and the proliferation ability in the experimental group was significantly higher than that in the control group at 7 days (P<0.05). The immunofluorescence staining results showed that the expressions of collagen type I, collagen type III, Fibronectin, and Tenascin-C in the experimental group were significantly higher than those in the control group at 5, 10, and15 days after culture (P<0.05). The real-time fluorescence quantitative PCR results revealed that the mRNA relative expressions had an increasing tendency at varying degrees with time in the experimental group (P<0.05). The relative mRNA expressions of collagen type I, collagen type III, Fibronectin, α-SMA, and VEGF in the experimental group were significantly higher than those in the control group at the other time points (P<0.05), but no significant difference was found in the relative mRNA expressions of collagen type I, collagen type III, and VEGF between 2 groups at 5 days (P>0.05). Conclusion The hAMSCs possesses the characteristics of MSCs and good proliferation ability which could be chosen as seed cell source in tissue engineering. The expressions of ligament fibroblasts and angiogenesis related genes could be up-regulated, after inductionin vitro, and the synthesis of ligament fibroblasts related proteins could be strengthened. In addition, the application of TGF-β1 and VEGF could be used as growth factors sources in constructing tissue engineered ligament.