Objective To investigate the clinical efficacy and safety of coblation-assisted adenotonsillectomy for treatment of children with obstructive sleep apnea hypopnea syndrome (OSAHS). Methods From June 2007 to May 2008, after monitoring polysomnography (PSG) confirmed 82 cases of OSAHS in children aged 3 to 14 years, with an average age of 6.2 years old, the ENT CoblatorII surgical instrument made by Arthrocare in the US and one-time EVac 70 T amp; A segment was used under complete anesthesia to remove tonsils and(or)adenoid ablation. Polysomnography monitoring was used preoperatively and 6 months postoperatively to determine the therapeutic effect. Results No significant complications occurred among the children both during the operation and postoperatively. Patients were followed for 6 months, and a satisfactory effect was achieved. The lowest oxygen saturation (LSaO2) improved significantly (Plt;0.001); the apnea-hypopnea index (AHI) decreased significantly after the operation (Plt;0.001). In accordance with OSAHS diagnosis and efficacy evaluation standards, 45 patients were cured after 6 months, 21 patients showed an excellent effect, 10 patients showed a good effect, six patients had no effect, and the total effective rate was 92.6%. Conclusion Low-temperature coblation-assisted adenotonsillectomy has good clinical efficacy with a shortened surgical time, less intraoperative and postoperative blood loss, less postoperative pain, few complications, and a simple operation procedure. It can effectively expand the nasopharynx, oropharynx ventilation cross-sectional area, lift the upper airway obstruction, and can be especially suitable for surgical treatment of children with OSAHS.
In recent years, target temperature management (TTM) has been increasingly applied to cardiac arrest patients, and programs and strategies for TTM are in a constant state of update and refinement. This paper analyzes and proposes relevant strategies from the concept of TTM, its clinical application status for cardiac arrest patients in domestic and international medical institutions, its deficiencies in the clinical practice, and factors affecting the development of TTM, with a view to providing a realistic basis for the development of high-quality TTM in medical institutions.
ObjectiveTo systematically review the efficacy and safety of intravascular cooling versus surface cooling for induced mild hypothermia on the prognosis of patients with cardiac arrest (CA) after resuscitation.MethodsPubMed, EMbase, The Cochrane Library, CNKI and WanFang Data databases were electronically searched to collect cohort studies and randomized controlled trials (RCTs) about the efficacy and safety of intravascular cooling versus surface cooling for CA patients after resuscitation from inception to July 2019. Two reviewers independently screened literature, extracted data and assessed the risk of bias of included studies, then, meta-analysis was performed by using Stata 13.0 software.ResultsA total of 9 cohort studies and 3 RCTs involving 2 104 patients were included. The results of meta-analysis showed that: the rate of good neurological function was significantly higher (OR=1.45, 95%CI 1.18 to 1.78, P<0.001) and the induction time was significantly shorter (SMD=−1.35, 95%CI −2.34 to −0.36, P=0.008) in the intravascular cooling group, but there was no statistical difference in mortality between two groups (OR=0.84, 95%CI 0.70 to 1.00, P=0.053). In terms of complications related to mild hypothermia, the rate of excessive hypothermia (OR=0.27, 95%CI 0.18 to 0.41, P<0.001) and arrhythmia (OR=0.60, 95%CI 0.40 to 0.89, P=0.012) was significantly lower in the patients treated with intravascular cooling, but the incidence of coagulopathy was higher (OR=1.61, 95%CI 1.05 to 2.49, P=0.03). There was no statistical difference in the incidence of pneumonia between two groups (OR=1.20, 95%CI 0.94 to 1.53, P=0.147).ConclusionCurrent evidence shows that intravascular cooling has significant neurological protection for patients with CA compared with surface cooling since it can decrease the induction time and the rate of excessive hypothermia and arrhythmia, but it may have a negative effect on the coagulation function. Due to the limited quality and quantity of the included studies, more high-quality studies are needed to verify the above conclusion.
A multiple-stimuli-responsive drug-conjugated cross-linked micelles was prepared by radical copolymerization. The chemical structure, morphology, and size of the cross-linked micelles were characterized, and the drug loading of the micelle was calculated. The experimental results indicated that the hydrodynamic size of the drug-loaded micelles were about 100 nm, and the as prepared micelles could be degraded and swelled in presence of reducing glutathione (GSH). The low critical solution temperature (LCST) of the micelle was around 39.4℃. According to the experimental results, the micelles will shrink at temperature above the LCST. Subsequently, the accumulative drug release rate was up to 91.78% under acidic (pH 5.0), reductive (GSH 10 mmol/L) and high temperature (42.0℃) conditions mimicking the tumor microenvironment, while a relatively low release rate of 1.12% was observed without stimulation. The drug-conjugated cross-linked micelles showed a strong cell uptake behavior. In the cytotoxicity assay, the micelles exhibited effective anti-cancer activity and excellent biocompatibility. In brief, the experimental results show that the as-prepared drug-conjugated cross-linked micelle exhibits multiple stimuli-responsiveness, which holds great promise for anti-cancer drug delivery.
Objective To explore the effect and mechanism of ultrashort wave (USW) for prevention and treatment of vascular crisis after rat tail replantation. Methods Eighty 3-month old female Sprague Dawley rats (weighing 232.8-289.6 g) were randomly divided into 5 groups. In each group, based on the caudal vein and the coccyx was retained, the tail was cut off. The tail artery was ligated in group A; the tail artery was anastomosed in groups B, C, D, and E to establish the tail replantation model. After surgery, the rats of group B were given normal management; the rats of group C were immediately given intraperitoneal injection (3.125 mL/kg) of diluted papaverine hydrochloride injection (1 mg/mL); the rats of groups D and E were immediately given the local USW treatment (once a day) at anastomotic site for 5 days at the dosage of 3 files and 50 mA for 20 minutes (group D) and 2 files and 28 mA for 20 minutes (group E). The survival rate of the rat tails was observed for 10 days after the tail replantation. The tail skin temperature difference between proximal and distal anastomosis was measured at pre- and post-operation; the change between postoperative and preoperative temperature difference was calculated. The blood plasma specimens were collected from the inner canthus before operation and from the tip of the tail at 8 hours after operation to measure the content of nitric oxide (NO). Results The survival rates of the rat tails were 0 (0/14), 36.4% (8/22), 57.1% (8/14), 22.2% (4/18), and 75.0% (9/12) in groups A, B, C, D, and E, respectively, showing significant overall differences among 5 groups (χ2=19.935, P=0.001); the survival rate of group E was significantly higher than that of group B at 7 days (P lt; 0.05), but no significant difference was found between the other groups by pairwise comparison (P gt; 0.05). At preoperation, there was no significant difference in tail skin temperature difference among 5 groups (P gt; 0.05); at 8 hours, 5 days, 6 days, and 7 days after operation, significant overall difference was found in the change of the skin temperature difference among groups (P lt; 0.05); pairwise comparison showed significant differences after operation (P lt; 0.05): group B gt; group D at 8 hours, group C gt; group D at 5 days, groups A, B, and C gt; group D at 6 days, groups B and C gt; groups A and E, and group B gt; group D at 7 days; but no significant difference was found between the other groups at the other time points (P gt; 0.05). Preoperative plasma NO content between each group had no significant difference (P gt; 0.05). The overall differences had significance in the NO content at postopoerative 8 hours and in the change of the NO content at pre- and post-operation among groups (P lt; 0.05). Significant differences were found by pairwise comparison (P lt; 0.05): group D gt; groups A, B, and C in the plasma NO content, group D gt; groups A and B in the change of the NO content at pre- and post-operation; but no significant difference was found between the other groups by pairwise comparison (P gt; 0.05). Conclusion Rat tail replantation model in this experiment is feasible. USW therapy can increase the survival rate of replanted rat tails, reduce skin temperature at 7 days, improve blood supply, increase the content of nitric oxide at the early period and prevent vascular crisis.
Objective To conduct a systematic review on the Electrocardiogram (ECG) changes in the workers exposed to high temperatures by means of meta-analysis.Methods The retrospective cohort studies on the relationship between high temperature and ECG abnormalities published from 1990 to May 2009 were searched in CNKI, VIP, WanFang database and CBM database. The literatures meeting the inclusive criteria were selected, the quality was assessed, the data were extracted, and the meta-analyses were conducted with RevMan 4.2.2 software. Results A total of 20 studies were included. The results of meta-analyses showed: the ECG abnormality rate of the high-temperature group was obviously superior to that of the control group with significant difference (OR=2.76, 95%CI 2.37 to 3.20, Plt;0.000 01). The high-temperature severely affected left ventricular hypertrophy (OR=3.49, 95%CI 2.83 to 4.31, Plt;0.000 01), sinus bradycardia (OR=2.83, 95%CI 2.33 to 3.43, Plt;0.000 01), and changes in ST-T segment (OR=2.63, 95%CI 1.48 to 4.68, P=0.000 10), which indicated that the abnormal changes of ECG, such as left ventricular hypertrophy, sinus tachycardia, sinus bradycardia, and changes in ST-T segment could be the sensitive indexes to monitor cardiovascular disease of workers exposed to high-temperature. Conclusion The incidence of ECG abnormalities caused by high-temperature operation is obviously superior to that of the control group, so it is required to strengthen the health monitoring and labor protection for the workers exposed to high temperature.
Numerical simulation is one of the most significant methods to predict the temperature distribution in high-intensity focused ultrasound (HIFU) therapy. In this study, the adopted numerical simulation was used based on a transcranial ultrasound therapy model taking a human skull as a reference. The approximation of the Westervelt formula and the Pennes bio-heat conduction equation were applied to the simulation of the transcranial temperature distribution. According to the temperature distribution and the Time Reversal theory, the position of the treatable focal region was corrected and the hot spot existing in the skull was eliminated. Furthermore, the influence of the exposure time, input power and the distance between transducer and skull on the temperature distribution was analyzed. The results showed that the position of the focal region could be corrected and the hot spot was eliminated using the Time Reversal theory without affecting the focus. The focal region above 60℃ could be formed at the superficial tissue located from the skull of 20 mm using the hot spot elimination method and the volume of the focal region increases with the exposure time and the input power in a nonlinear form. When the same volume of the focal region was obtained, the more power was inputted, the less the exposure time was needed. Moreover, the volume of the focal region was influenced by the distance between the transducer and the skull.
Patch clamp is a technique that can measure weak current in the level of picoampere (pA). It has been widely used for cellular electrophysiological recording in fundamental medical researches, such as membrane potential and ion channel currents recording, etc. In order to obtain accurate measurement results, both the resistance and capacitance of the pipette are required to be compensated. Capacitance compensations are composed of slow and fast capacitance compensation. The slow compensation is determined by the lipid bilayer of cell membrane, and its magnitude usually ranges from a few picofarads (pF) to a few microfarads (μF), depending on the cell size. The fast capacitance is formed by the distributed capacitance of the glass pipette, wires and solution, mostly ranging in a few picofarads. After the pipette sucks the cells in the solution, the positions of the glass pipette and wire have been determined, and only taking once compensation for slow and fast capacitance will meet the recording requirements. However, when the study needs to deal with the temperature characteristics, it is still necessary to make a recognition on the temperature characteristic of the capacitance. We found that the time constant of fast capacitance discharge changed with increasing temperature of bath solution when we studied the photothermal effect on cell membrane by patch clamp. Based on this phenomenon, we proposed an equivalent circuit to calculate the temperature-dependent parameters. Experimental results showed that the fast capacitance increased in a positive rate of 0.04 pF/℃, while the pipette resistance decreased. The fine data analysis demonstrated that the temperature rises of bath solution determined the kinetics of the fast capacitance mainly by changing the inner solution resistance of the glass pipette. This result will provide a good reference for the fine temperature characteristic study related to cellular electrophysiology based on patch clamp technique.
ObjectiveTo study the method of rapid and accurate measurement of body temperature in dense population during the coronavirus disease 2019 pandemic.MethodsFrom January 27th to February 8th, 2020, subjects were respectively measured with two kinds of non-contact infrared thermometers (blue thermometer and red one) to measure the temperature of forehead, neck, and inner side of forearm under the conditions of 4–6℃ (n=152), 7–10℃ (n=103), and 11–25℃ (n=209), while the temperature of axillary was measured with mercury thermometer under the same conditions. Taking the mercury thermometer temperature as the gold standard, the measurement results with non-contact infrared thermometers were compared.ResultsAt 7–10℃, there was no statistical difference among the forehead temperatures measured by the two non-contact infrared thermometers and the axillary temperature (P>0.05); there was no difference among the temperature measured by blue thermometer on forehead, neck, and inner side of forearm (P>0.05); no difference was found between the temperature measured by the red thermometer on forehead and inner side of forearm (P>0.05), while there was statistical difference between the temperatures measured by the red thermometer on forehead and neck (P<0.05). Under the environment of 11−25℃, there was no statistical difference among the forehead temperatures measured by the two infrared thermometers and the axillary temperature (P>0.05); the difference between the temperatures of forehead and inner side of forearm measured by the blue thermometer was statistically significant (P<0.05), while no difference appeared between the forehead and neck temperatures measured by the blue thermometer (P>0.05); there was no statistical difference among the temperatures of three body regions mentioned above measured by the red thermometer (P>0.05). According to the manual, the allowable fluctuation range of the blue thermometer was 0.3℃, and that of the red one was 0.2℃. The mean differences in measured values between different measured sites of the two products were within the allowable fluctuation range. Therefore, the differences had no clinical significance in the environment of 7–25℃. Under the environment of 4–6℃, the detection rate of blue thermometer was 2.2% and that of the red one was 19.1%.ConclusionsThere is no clinical difference between the temperature measured by mercury thermometer and the temperature measured by temperature guns at 7–10 or 11–25℃, so temperature guns can be widely used. In order to maintain the maximum distance between the measuring and the measured persons and reduce the infection risk, it is recommended to choose the inner forearm for temperature measurement. Under the environment of ambient temperature 4–6℃, the detection rate of non-contact electronic temperature gun is low, requiring taking thermal measures for the instrument.
Objective To investigate the construction of a novel tissue engineered meniscus scaffold based on low temperature deposition three-dimenisonal (3D) printing technology and evaluate its biocompatibility. Methods The fresh pig meniscus was decellularized by improved physicochemical method to obtain decellularized meniscus matrix homogenate. Gross observation, HE staining, and DAPI staining were used to observe the decellularization effect. Toluidine blue staining, safranin O staining, and sirius red staining were used to evaluate the retention of mucopolysaccharide and collagen. Then, the decellularized meniscus matrix bioink was prepared, and the new tissue engineered meniscus scaffold was prepared by low temperature deposition 3D printing technology. Scanning electron microscopy was used to observe the microstructure. After co-culture with adipose-derived stem cells, the cell compatibility of the scaffolds was observed by cell counting kit 8 (CCK-8), and the cell activity and morphology were observed by dead/live cell staining and cytoskeleton staining. The inflammatory cell infiltration and degradation of the scaffolds were evaluated by subcutaneous experiment in rats. Results The decellularized meniscus matrix homogenate appeared as a transparent gel. DAPI and histological staining showed that the immunogenic nucleic acids were effectively removed and the active components of mucopolysaccharide and collagen were remained. The new tissue engineered meniscus scaffolds was constructed by low temperature deposition 3D printing technology and it had macroporous-microporous microstructures under scanning electron microscopy. CCK-8 test showed that the scaffolds had good cell compatibility. Dead/live cell staining showed that the scaffold could effectively maintain cell viability (>90%). Cytoskeleton staining showed that the scaffolds were benefit for cell adhesion and spreading. After 1 week of subcutaneous implantation of the scaffolds in rats, there was a mild inflammatory response, but no significant inflammatory response was observed after 3 weeks, and the scaffolds gradually degraded. Conclusion The novel tissue engineered meniscus scaffold constructed by low temperature deposition 3D printing technology has a graded macroporous-microporous microstructure and good cytocompatibility, which is conducive to cell adhesion and growth, laying the foundation for the in vivo research of tissue engineered meniscus scaffolds in the next step.