ObjectiveTo summarize the characteristics and biomechanical research progress of common internal fixation for femoral neck fractures in recent years, so as to provide reference to clinical treatment of femoral neck fracture. Methods The domestic and foreign relevant literature on biomechanics of internal fixation of femoral neck fracture in recent years was reviewed, and the biomechanical research progress was summarized. Results Among the internal fixations currently used in the treatment of femoral neck fractures, three cannulated screws can provide sliding compression at the end of the fracture, but the shear resistance is weak, and the risk of long-term internal fixation failure is high; dynamic hip screw and proximal femoral locking plate have excellent angle stability and overall strength; medial buttress plate can transform vertical shear force into compressive stress to promote fracture healing and produce a certain anti-rotation effect; femoral neck system can support the fracture in multi-axial direction, with excellent anti-rotation and anti-shortening properties; and cephalomedullary nails have high overall strength and failure load. Different internal fixations have their own indications due to differences in structure and biomechanics. ConclusionAt present, there is no detailed standard guidance of internal fixation selection. Clinically, the appropriate treatment should be selected according to the fracture types of patients.
Objective To summarize the characteristics and biomechanical research progress of common acetabular reconstruction techniques in patients with Crowe type Ⅱ and Ⅲ developmental dysplasia of the hip (DDH) undergoing total hip arthroplasty (THA), and provide references for selecting appropriate acetabular reconstruction techniques for clinical treatment of Crowe type Ⅱ and Ⅲ DDH. Methods The domestic and foreign relevant literature on biomechanics of acetabular reconstruction with Crowe type Ⅱ and Ⅲ DDH was reviewed, and the research progress was summarized.Results At present, there are many acetabular reconstruction techniques in Crowe type Ⅱ and Ⅲ DDH patients undergoing THA, with their own characteristics due to structural and biomechanical differences. The acetabular roof reconstruction technique enables the acetabular cup prosthesis to obtain satisfactory initial stability, increases the acetabular bone reserve, and provides a bone mass basis for the possible secondary revision. The medial protrusio technique (MPT) reduces the stress in the weight-bearing area of the hip joint and the wear of the prosthesis, and increases the service life of the prosthesis. Small acetabulum cup technique enables shallow small acetabulum to match suitable acetabulum cup to obtain ideal cup coverage, but small acetabulum cup also increases the stress per unit area of acetabulum cup, which is not conducive to the long-term effectiveness. The rotation center up-shifting technique increases the initial stability of the cup. Conclusion Currently, there is no detailed standard guidance for the selection of acetabular reconstruction in THA with Crowe type Ⅱ and Ⅲ DDH, and the appropriate acetabular reconstruction technique should be selected according to the different types of DDH.
ObjectiveThe research progress on repairing segmental bone defects using three-dimensional (3D)-printed bone scaffolds combined with vascularized tissue flaps in recent years was reviewed and summarized. Methods Relevant literature was reviewed to summarize the application of 3D-printed technology in artificial bone scaffolds made from different biomaterials, as well as methods for repairing segmental bone defects by combining these scaffolds with various vascularized tissue flaps. Results The combination of 3D-printed artificial bone scaffolds with different vascularized tissue flaps has provided new strategies for repairing segmental bone defects. 3D-printed artificial bone scaffolds include 3D-printed polymer scaffolds, bio-ceramic scaffolds, and metal scaffolds. When these scaffolds of different materials are combined with vascularized tissue flaps (e.g., omental flaps, fascial flaps, periosteal flaps, muscular flaps, and bone flaps), they provide blood supply to the inorganic artificial bone scaffolds. After implantation into the defect site, the scaffolds not only achieve structural filling and mechanical support for the bone defect area, but also promote osteogenesis and vascular regeneration. Additionally, the mechanical properties, porous structure, and biocompatibility of the 3D-printed scaffold materials are key factors influencing their osteogenic efficiency. Furthermore, loading the scaffolds with active components such as osteogenic cells and growth factors can synergistically enhance bone defect healing and vascularization processes. ConclusionThe repair of segmental bone defects using 3D-printed artificial bone scaffolds combined with vascularized tissue flap transplantation integrates material science technologies with medical therapeutic approaches, which will significantly improve the clinical treatment outcomes of segmental bone defect repair.